I lager hos oss 1 enhet redo att skickas från vårt eget lager — köp nu eller be oss om ett volympris.

Yokogawa Lägg ett bud

701250

Yokogawa 701250 High-Speed 10 MS/s 12-Bit Isolation Module, 2 ch (HS10M12) for DL750 / DL850 ScopeCorder

Kategori Other Automation

Enhet: pcs

Art.nr (normaliserat): 701250

I lager 1 (Begagnad)

Lägg ett bud

1 enhet i lager

Föreslå ditt eget pris för den här artikeln — vi svarar här.

Bud och priser är inte bindande förrän en beställning har lagts och bekräftats.

Tillgängliga enheter (1)

Om 701250

The Yokogawa 701250 (front-panel code HS10M12) is a two-channel isolated voltage input module for Yokogawa ScopeCorder data-acquisition recorders. Each channel has its own isolated BNC input sampled at up to 10 MS/s with 12-bit resolution and a DC to 3 MHz bandwidth, so one slot records two floating signals such as inverter outputs, gate drive or sensor voltages.

Direct input is rated 250 V (DC+AC peak); with the 700929 10:1 isolated probe the module measures up to 600 V with 400 Vrms (CAT I) common mode. Sensitivity runs from 5 mV/div to 20 V/div, DC accuracy is +/-0.5% of 10 div, and a selectable bandwidth limit (500 Hz to 500 kHz) helps reject noise.

Yokogawa's compatibility table lists it for the DL750/DL750P, SL1400, SL1000, DL850/DL850V/DL850E/DL850EV, DL950 and SL2000 (each with a minimum firmware). It is not listed for the DL350. Yokogawa discontinued the 701250 on 29 September 2017 and names the 720250 General Purpose Isolation Module as its replacement.

Vanliga frågor

Which ScopeCorders accept the 701250?

Yokogawa lists the DL750/DL750P (firmware 1.07+), SL1400 (6.51+), SL1000 (1.10+), DL850/DL850V/DL850E/DL850EV (1.01+), DL950 (1.01+) and SL2000 (2.01+). It does not fit the older DL708E/DL716, which use single-channel 7018xx modules such as the 701855.

Why might a DL850 show error 916 with this module?

Yokogawa notes that some 701250/701255 modules shipped on or before July 2007 may need factory rework before use in the DL850 series, and that older mainframe firmware may not recognise a module. Check the module serial number with Yokogawa and update the firmware.

What replaced the 701250?

Yokogawa names the 720250 General Purpose Isolation Module (10 MS/s, 12-bit) as the replacement. The 720250 is listed for the DL850 series (firmware 4.10+), DL350, DL950, SL1000 and SL2000, but not for the DL750.

Is a probe included?

No. Yokogawa states that probes are not included with any module. The 700929 10:1 probe is needed for the 600 V rating.

Dokument

DL850/DL850V plug-in modules bulletin DL850-01EN (Yokogawa)
Datablad · English · cdn.tmi.yokogawa.com
Precautions concerning the modules and module/mainframe compatibility table, IM 701250-04E (Yokogawa)
Manual · English · cdn.tmi.yokogawa.com
DL850E/DL850EV ScopeCorder getting started guide IM DL850E-03EN (Yokogawa)
Manual · English · cdn.tmi.yokogawa.com

Specifikationer

Lifecycle	Discontinued 29 Sep 2017; replacement 720250
Input type	Isolated unbalanced, BNC (isolated type)
DC accuracy	+/-(0.5% of 10 div)
A/D resolution	12 bit (150 LSB/div)
Input channels	2
Input coupling	AC, DC, GND
Bandwidth limit	OFF / 500 Hz / 5 kHz / 50 kHz / 500 kHz
Input impedance	1 MOhm +/-1%, approx. 35 pF
Maximum sample rate	10 MS/s
Compatible mainframes	DL750, DL750P, SL1400, SL1000, DL850, DL850V, DL850E, DL850EV, DL950, SL2000
Maximum input voltage	250 V (DC+AC peak) direct; 600 V (DC+AC peak) with 700929 10:1 probe
Frequency range ( 3 dB)	DC to 3 MHz
Voltage axis sensitivity	5 mV/div to 20 V/div
Maximum common mode voltage	42 V (DC+AC peak) direct; 400 Vrms CAT I / 300 Vrms CAT II with 700929

Prishistorik Prisöversikt

Läser in …

Tillgängliga erbjudanden

Inga erbjudanden registrerade för den här produkten ännu.

Egenskap

Åtgärder